-40%

Dtech Restore Glass Ionomer Restorative Cement

$ 6.85

Availability: 33 in stock
  • Brand: D-Tech
  • Model: RESTORE GLASS
  • Intended Use/Discipline: Dental Laboratory, Dentistry, Endodontics
  • Composition: Glass Ionomer
  • Condition: New

    Description

    DESCRIPTION
    D-Tech RESTORE  Glass
    Indications
    INDICATIONS FOR USE:
    RESTORE GLASS  is a truly economical restorative cement with
    aesthetic looks
    Restoration of primary teeth
    Core build - up
    Restorations of Class III ,V and limited Class I cavities.
    The standard powder to liquid ratio is
    DISPENSING   INSTRUCTIONS:
    2.8/1.0 g.1 level scoop of powder to 2 drops of liquid.
    For accurate dispensing of powder, lightly tap the borle against the hand. Do not shake or invert.
    Hold the liquid bottle vertically and squeeze gently.
    Close bottle immediately after use.
    Key Specifications
    Aesthetic looks
    Fluoride release
    Humid-Stable glass ionomer restorative cement
    Directions
    MIXING:
    Dispense powder and liquid onto the pad . Using a plastic spatula, divide the powder into 2 equal parts. Mix the first portion with all of the liquid for 10 seconds. Incorporate the remaining portion and mix the whole thoroughly for 15 - 20 sec. (total time within 30 seconds)
    RESTORATIVE  TECHNIQUE:
    Prepare tooth using standard techniques. Extensive mechanical retention is not necessary. For pulp capping use calcium hydroxide  paste.
    Wash & Dry but DO NOT DESICCATE. D-Tech’s dentine conditioner is recommended to remove the smear layer.
    Mix the required amount of cement. Working time is 2 min.
    from the start of mixing at 23’C (73.4’ F).Higher temperatures
    will shorten working time.
    Remove surface moisture but DO  NOT DESSICATE.
    Transfer cement to the preparation using a syringe or suitable placement instrument. avoid air bubbles.
    Form the contour, and place a matrix if required during the first 2 minutes of setting.
    Setting time is 4 min. after  start of mixing. Once set,
    remove the matrix & immediately apply D-Tech’S varnish.
    Tech Info
    Mixing Time  23°C - 30 second
    Working time B 23°C - 2:00 min
    Setting time B 23°C -  4:00 min
    Shelf life - 2 years
    Package Contents:
    Powder-15g, Liquid-13g, Powder Scoop-1, Mixing Pad-1
    DISCLAIMER
    The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, please not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.